The versatility of Pneumatic high strain grouting pumps

Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the free rock mass. The maximum grain size can not exceed 0.2 mm.
Grouting pump operation and upkeep is simple, secure and reliable. This pump is used in mines working beneath troublesome conditions as a outcome of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it actually works
Pneumatic strain in the air cylinder exerts a excessive pressure on the grout combination which leads to ejection of grout with a excessive strain and velocity. The valves of the air cylinder in the pump operate routinely to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to finish the pumping cycle.
Pneumatic grout pump could be pushed even without Electrical power provide in distant areas by using engine pushed compressor.
Applications
The pump is majorly utilized in construction and mining trade for injecting material into wide and medium measurement gap in beams, columns ,basement partitions and flooring, raise shaft concrete wall fill-up etc. In mining industry it is used to fill up cement resolution the place there is a gap exists between structure and rock and for soil stabilization.
Detachable design tends to easy upkeep and transportation. Recognized like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively utilized in tunnels, coal mine, bridges and dams, building foundation, and other underground projects, and inflammable, explosive sites and different dangerous setting.
It has software in chemical trade also to pump out chemical slurries.
The pump is electricity free so, can be utilized at any website situation whether or not it’s rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting quantity is 8 or10 times of the quantity in the beginning. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and circulate may be adjusted according to the necessities of grouting,(The flow of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is mainly used for highways, railways, water and electrical energy, building, mining and so forth. ground/underground construction.
Benefits
Mining Pneumatic Grouting pump has some nice benefits of low vitality consumption, small vibration, low noise, small size, high efficiency, dependable performance, pressure and circulate management, lengthy life and so forth. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can also be Light weight and with a wheelie design it can be carried easily. It is designed for simple operation and low maintenance. Last but not least its spare elements are simply obtainable.
Share

Leave a Comment